The table provides data regarding the number of required rooms, the required clear height and area of individual rooms, the manner of equipping as well as the conditions regarding natural lighting and ventilation.

 

General information:

The table shows the equipment planned for certain spaces in order to explain the manner of use and the processes taking place there. This description should be used by the participants in the competition to perform a spatial check during work and it is not necessary to draw the disposition of the said equipment in the design.

The room areas are given net and represent the minimum/optimal requirements, minor deviations in flooring surface and height are permitted.

Participants can, if possible within the urban conditions, to propose additional spaces that contribute to the functional organization and quality of teaching.

Program elements and contents of the new building of the Faculty of Music in Belgrade

The new building of the Faculty of Music consists of the following program and functional units:

A             DEPARTMENT OF APPLIED PAINTING

B              DEPARTMENT OF APPLIED SCULPTURE

C              DEPARTMENT OF APPLIED GRAPHICS

D             SHARED PREMISES

E              TECHNICAL FACILITIES

F              COMMUNICATIONS

G             GARAGE AND AUXILIARY PREMISES

A DEPARTMENT OD APPLIED PAINTING

 

А.1.1-А.1.2

Workspace - of painting class for drawing and painting courses

floor area of the room: 100 m²

number of rooms: 2

users (number)

students: 30

teachers: 1 assistant +1

clear ceiling height: 3.5m -4.5m

necessary connection with other rooms

working rooms from А.1.1 to А.1.5 and offices А 2.1 А 2.2 need to be connected

preferably natural from the north side

it is necessary to enable the connection of rooms for exhibition needs – sliding parts of walls - doors

installations

- faucet

- heating: adequate with amplified heating unit for models posing in winter season

materialization/other:

podiums for placing of compositions and models

equipment /furniture and devices/

- 30 easels

- 30 work cabinets with closet and work surface of 1 m²

- 30 chairs

- 30 boards 120 cm x 150 cm

- wooden canvas frames 120 cm x 150 cm

-video projector

А.1.3-А.1.4

Workspace of painting classes for applied painting courses

floor area of the room: 150 m²

number of rooms: 2

users (number)

students: 30

teachers: 3+2

clear ceiling height: 3.5m -4.5m

necessary connection with other rooms

working rooms from А.1.1 to А.1.5 and offices А 2.1 А 2.2 need to be connected

natural from the north side

it is necessary to enable the connection of rooms for exhibition needs – sliding parts of walls - doors

installations:

faucet

materialization/other:

podiums for painting settings and model posing

equipment /furniture and devices/

- 30 easels

- 30 work cabinets with closet and work surface of 1 m²

- 30 chairs

- 30 boards 120 cm x 150 cm

- wooden canvas frames 120 cm x 150 cm

-video projector

А.1.5

of painting class for master studies

floor area of the room: 100 m²

number of rooms: 1

users (number)

students: 15

teachers: 3+2

clear ceiling height: 3.5m -4.5m

necessary connection with other rooms

working rooms from А.1.1 to А.1.5 and offices А 2.1 А 2.2 need to be connected

- natural from the north side

- artificial lighting adjusted to work needs

installations:

- faucet

equipment /furniture and devices/

- 15 easels

- 15 work cabinets with closet and work surface of 1 m²

- 30 pieces of wooden canvas frames 120 cm x 150 cm

А.1.6-A.1.7

Workspace - for courses of graphic arts in applied painting, conservation and sculpting departments (2x100m2)

floor area of the room: 100 m²

number of rooms: 2

necessary connection with other rooms

- in the vicinity or within other graphic arts workshops

users (number)

students: 20

teachers: 1+1

clear ceiling height: 3.5m -4.5m

special requirements

- natural lighting

- good quality artificial lighting

- it is necessary to enable the connection of these two rooms for exhibition needs – sliding parts of walls - doors

equipment /furniture and devices/

- 20 work surfaces

А.1.8

for courses of graphic arts in applied painting, conservation and sculpting departments

floor area of the room: 15m²

number of rooms: 1

necessary connection with other rooms

- in vicinity of workspaces for courses of graphic arts in applied painting, conservation and sculpting departments

clear ceiling height: 3.5 m

А.1.9

Workspace - hall for drawing anatomy and nude

- hall: 100 m²

- auxiliary room: 20m²

floor area of the room: 120m²

number of rooms: 1

students:

teachers: 4+2

clear ceiling height: 3.5m -4.5m

equipment /furniture and devices/

hall:

- work surfaces with stepped seating in 5 rows in semicircle or full-circle arrangement around rotating pedestal for models

auxiliary room:

- for the necessary props and teaching aids needed for lectures with enough room for several decades collection of works

А.1.10

Painting workshop for seniors and master’s students

- hall: 100 m²

- auxiliary room: 20m² /materials and depot for final works/

floor area of the room: 120m²

number of rooms: 1

necessary connection with other rooms

- preferably on the ground floor

- in vicinity of sculpting workshops

users (number)

students: 20

teachers: 3+1

clear ceiling height: 3.5m -4.5m

special requirements

- natural lighting

- good quality artificial lighting

installations:

- faucet

- electrical installations of amplified power due to the use of tools

equipment /furniture and devices/

- work surfaces (horizontal and vertical) for wall painting techniques for 20 students

- desk for assistant

- computer

- projection set

А.1.11

painting workshop

for needs of applied painting basics and wall painting and conservation and restoration basics

- hall: 100 m²

- auxiliary room: 20m²

floor area of the room: 120m²

number of rooms: 1

necessary connection with other rooms

- in vicinity of the painting workshop for seniors and master’s students (A.1.10)

- in vicinity of sculpting workshops

users (number)

students: 20

teachers: 3+1

clear ceiling height: 3.5m -4.5m

special requirements

- natural lighting

- good quality artificial lighting

installations:

- electrical installations of amplified power due to the use of tools

equipment /furniture and devices/

- work surfaces for 20 students

- desk with a chair for an assistant

- computer

А.1.12

Painting workshop for glass and stained glass fusion

floor area of the room: 50 m²

number of rooms: 1

necessary connection with other rooms

- in vicinity of (within) painting workshops А.1.10 and А.1.11

users (number)

students: 20

teachers: 3+1

clear ceiling height: 3.5m -4.5m

special requirements

- natural lighting

- good quality artificial lighting

installations:

- electrical installations up to 24 KV for electric fusion furnace

equipment /furniture and devices/

- work surfaces for 20 students

А.1.13-А.1.14

Studio workshop for needs of painting techniques courses

- studio: 100 m²

- depot: 10 m²

- special room for gilding process and process of coating with protective finishing varnishes and coatings: 20m²

floor area of the room: 130 m²

number of rooms: 2

users (number)

students: 20

teachers: 2+1

clear ceiling height: 3.5m -4.5m

special requirements

- natural lighting

- good quality artificial lighting

equipment /furniture and devices/

- work surfaces for 20 students

 

А.2.1

Office for needs of drawing and painting courses

within the office, closet for necessary painting equipment and small depot for works of students should be provided

floor area of the room: 30 m²

number of rooms: 1

necessary connection with other rooms

- in vicinity of workplace of painting class for drawing and painting courses (A.1.1, A.1.2)

users (number)

teachers: 1+1

clear ceiling height: 3.0 -3.5m

equipment /furniture and devices/

-2 work desks

- 2 desk chairs

- 2 chairs

-2 computers

- book shelf

А.2.2

Office for needs of lecturer of applied painting for bachelor and master studies

description of activities

within the office, closet for equipment needed in teaching and small depot for works of students should be provided

floor area of the room: 30 m²

number of rooms: 1

necessary connection with other rooms

- in vicinity of painting classes for applied painting courses and master studies (A.1.3, A.1.4, A.1.5)

users (number)

students: /

teachers: 3+2

clear ceiling height: 3.0-3.5m

special requirements

lighting:

equipment /furniture and devices/

- 3 work desks

- 3 desk chairs

- 3 computers

- book shelf

А.2.3-А.2.4

Office for the course of anatomy drawing and nude

floor area of the room: 30 m²

number of rooms: 2

necessary connection with other rooms

- in the immediate vicinity or within the hall for anatomy drawing (A.1.9)

users (number)

teachers: 4+2

clear ceiling height: 3.0-3.5 m

equipment /furniture and devices/

- 3 work desks

- 3 desk chairs

- 3 computers

- book shelf

 - fund of works

А.2.5

Office for painting techniques lecturers

floor area of the room: 30 m²

number of rooms: 1

necessary connection with other rooms

- next to the studio workshop for needs of painting techniques courses (A.1.13, A.1.14)

users (number) teachers: 2+1

clear ceiling height: 3.0-3.5 m

equipment /furniture and devices/

- 3 work desks

- 3 desk chairs

- 3 computers

- book shelf

 

B DEPARTMENT OF APPLIED SCULPTURE

 

B.1.1

sculpting class 1

floor area of the room: 130 m²

- workspace: 100 m²

- auxiliary room: 30 m²

number of rooms: 1

necessary connection with other rooms connection with sculpting class 2

users (number) students: 20 teachers: 1

clear ceiling height: 4.5 m (auxiliary room might be lower)

special requirements

- good natural lighting

installations:

- washbasin with warm water

- heating: good

materialization/other:

without supporting walls or pillars within the workspace

equipment /furniture and devices/

workspace:

- 20 sculpting easels

- 20 lockers for students

- 2 posing podiums, dimensions 1.4 m²

- 2 posing podiums, dimensions 0.8 m²

-20 pedestals auxiliary room:

- 30 pcs. of sculpting frames for portrait

- 20 pcs. of sculpting frames for small nude sculpture

- 20 pcs. of sculpting frames for medium nude sculpture

- 30 pedestals

B.1.2

sculpting class 2

 workspace: 100 m²

 auxiliary room: 40 m²

floor area of the room: 140 m²

number of rooms: 1

necessary connection with other rooms connection with sculpting class 1

users (number)

students: 20

teachers: 1

clear ceiling height: 4.5 m (auxiliary room might be lower)

special requirements

- good natural lighting

installations:

- washbasin with warm water

- heating: good

materialization/other:

without supporting walls or pillars within the workspace

equipment /furniture and devices/

workspace:

- 20 sculpting easels

- 20 lockers for students

- 2 posing podiums, dimensions 1.4 m²

- 2 posing podiums, dimensions 0.8 m²

- 20 pedestals

 auxiliary room:

- clay grinding machine -30 sculpting frames for portrait

- 20 sculpting frames for medium nude sculpture

- 10 sculpting frames for big nude sculpture

B.1.3

sculpting class 3

- workspace: 100 m²

- auxiliary room: 30 m²

floor area of the room: 130 m²

number of rooms: 1

users (number) students: 20 teachers: 2

clear ceiling height: 4.5 m (auxiliary room might be lower)

special requirements

 - good natural lighting

installations:

- faucet

- heating: good

materialization/other:

without supporting walls or pillars within the workspace

equipment /furniture and devices/

- 20 sculpting easels

- 20 lockers for students

- 20 pedestals

- 15 work desks

- 15 chairs

B.1.4

sculpting class 4

- workspace: 100 m²

- auxiliary room: 30 m²

floor area of the room: 130 m²

number of rooms: 1

users (number)

students: 20

teachers:2

clear ceiling height: 4.5 m (auxiliary room might be lower)

special requirements

- good natural lighting

installations:

- faucet

- heating: good

materialization/other:

without supporting walls or pillars within the workspace

equipment /furniture and devices/

- 20 sculpting easels

- 20 lockers for students

- 20 pedestals

- 15 work desks

- 15 chairs

B.1.5

sculpting class 5

- workspace: 100 m²

- auxiliary room: 30 m²

floor area of the room: 130 m²

number of rooms: 1

users (number)

students: 20

teachers: 1

clear ceiling height: 6.5 m (auxiliary room might be lower)

special requirements

- good natural lighting

installations:

- washbasin with warm water

materialization/other:

without supporting walls or pillars within the workspace

equipment /furniture and devices/

- 20 sculpting easels

- 20 lockers for students

- 20 pedestals

- 15 work desks

- 15 chairs        

B.1.6

class for sculpting basics

- workspace: 100 m²

- auxiliary room: 40 m²

floor area of the room: 140 m²

number of rooms: 1

users (number)

students: 20

teachers: 2+1

clear ceiling height: 4.5 m (auxiliary room might be lower)

special requirements

- good natural lighting

installations:

- washbasin with warm water

materialization/other:

without supporting walls or pillars within the workspace

equipment /furniture and devices/

workspace:

- 25 sculpting easels

- 20 lockers for students

- 20 work desks

-20 chairs auxiliary room:

- clay grinding machine

- 20 pedestals

B.1.7

classroom - drawing studio

floor area of the room: 100 m²

number of rooms: 1

necessary connection with other rooms

users (number)

students: 20

teachers: 1

clear ceiling height: 4.5 m

special requirements

- natural lighting: several north-oriented windows

- artificial lighting: coverage of whole room from the ceiling + two spotlights with stands

installations:

- faucet

- several electrical sockets

- heating: adequate with amplified heating unit for models posing in winter season

materialization/other:

- without supporting walls or pillars within the workspace

- walls could be used for hanging works, if necessary

equipment /furniture and devices/

- 15 painting easels

- 15 MDF boards of dimensions 70 cm x 100 cm

-15 pine wood stretcher frames, dimensions 100 cm x 150 cm

-15 pine wood stretcher frames, dimensions 140 cm x 210 cm

- 15 lockers for students

-20 chairs

- two-part screen dimensions, 70 cm x 200 cm

-posing podium dimensions, 160 cm x 200 cm x 40 cm

- mattress, dimensions 100 cm x 200 cm x 15 cm

- video projector and projector mount

- skeleton model - human skeleton on the pedestal

B.1.8

Classroom - painting studio

floor area of the room: 100 m²

number of rooms: 1

users (number)

students: 20

teachers: 1

clear ceiling height: 4.5 m

special requirements

- natural lighting: several north-oriented windows

- artificial lighting: coverage of whole room from the ceiling + two spotlights with stands

installations:

- faucet

- several electrical sockets

- heating: adequate with amplified heating unit for models posing in winter season

materialization/other:

- without supporting walls or pillars within the workspace

- walls could be used for hanging works, if necessary

equipment /furniture and devices/

- 15 painting easels

-15 pine wood stretcher frames, dimensions 70 cm x 100 cm

-15 pine wood stretcher frames, dimensions 100 cm x 150 cm

- 15 lockers for students

- 15 boxes for disposal of materials and works of students

-20 chairs

- two-part screen, dimensions 70 cm x 200 cm

-posing podium, dimensions 160 cm x 200 cm x 40 cm

- mattress, dimensions 100 cm x 200 cm x 15 cm

- video projector and projector mount - human musculature model on the pedestal

B.1.9

auxiliary room for drawing and painting needs

description of activities

- used for disposal of necessary props, easels, frames, papers, works, computers, additional lighting and all means used for the purpose of teaching

floor area of the room: 30 m²

number of rooms: 1

necessary connection with other rooms

- direct connection to studios B.1.7 and B.1.8 - has a separate entrance

clear ceiling height: 3.0 m

special requirements

- natural ventilation (windows)

equipment /furniture and devices/

- cabinets

- metal cabinet with drawers for drawings

- organized shelves

-desk

- 2 chairs

- triple extension ladder

- computer (laptop)

-printer

B.1.10

stone workshop

floor area of the room: 100 m²

number of rooms: 1

users (number)

students: 20

teachers: 1

clear ceiling height: 6.0 m

special requirements

- outdoor entrance of non-standard dimensions 3 m x 3 m

installations:

- washbasin with warm water

- amplified electric installations

- amplified ventilation (for stone dust)

- heating

materialization/other:

- possibility for bridge crane installation

equipment /furniture and devices/

-15 easels for realization of stone sculptures 60 cm x 60 cm x 90 cm

- 3 tool cabinets, dimensions 200 cm x 60 cm x 200 cm

- metal shelves for disposal of stone sculptures (along one wall)

- prochrome tub for fine sculpture processing

B.1.11

auxiliary room for stone

floor area of the room: 30 m²

number of rooms: 1

clear ceiling height: approximately 4.5 m

special requirements

outdoor entrance of non-standard dimensions 3x3 m

equipment /furniture and devices/

- self standing double edge grinder

- workbench with clamps

/different types of stone materials/

B.1.12

metal foundry

floor area of the room: 50 m²

number of rooms: 1

users (number)

students: 20

teachers: 1

clear ceiling height: 6.0 m

special requirements

- outdoor entrance of non-standard dimensions 3 m x 3 m

installations:

- faucet

- amplified electric installations

- amplified ventilation (due to metal dust and fumes)

equipment /furniture and devices/

-2 work desks, dimensions 300 cm x 100 cm

-1 work desks, dimensions 150 cm x 100 cm

- 5 chairs

-5 tool closets - prochrome tube, dimensions 200 cm x 100 cm

- shelves for materials

B.1.13

workshop for rough machining

floor area of the room: 50 m²

number of rooms: 1

users (number)

students: 20

teachers:

clear ceiling height: 4.5 m

special requirements

- outdoor entrance of non-standard dimensions 3 m x 3 m

installations:

- faucet

- amplified electric installations

- amplified ventilation (due to metal dust)

equipment /furniture and devices/

-2 work desks, dimensions 300 cm x 100 cm

-1 work desks, dimensions 150 cm x 100 cm

- 5 chairs

- 5 tool cabinet

- shelves for materials

B.1.14

jewelry workshop

floor area of the room: 50 m²

number of rooms: 1

users (number)

students: 20

teachers:

clear ceiling height: 4.5 m

installations:

- faucet

- amplified electric installations

- amplified ventilation (due to metal dust)

equipment /furniture and devices/

- 7 jewelers workbenches, dimensions 100 cm x 60 cm

-1 work desks, dimensions 150 cm x 100 cm

- 1 work desks, dimensions 400 cm x 800 cm

- 10 chairs - 5 tool cabinets

- prochrome tube, dimensions 150 cm x 80 cm - safe for keeping materials and jewelry

B.1.15

auxiliary room for metal

description of activities

- outdoor entrance of non-standard dimensions 3 m x 3 m

floor area of the room: 30 m²

number of rooms: 1

users (number)

students:

teachers:

clear ceiling height: approximately 4.5 m

special requirements

- outdoor entrance of non-standard dimensions 3 m x 3 m

equipment /furniture and devices/

- shelves for material storage

- metal sheets carrier

- fireproof cabinet, dimensions 200 cm x 150 cm x 50 cm

B.1.16

workshop for rough woodworking

floor area of the room: 50 m²

number of rooms: 1

users (number)

students: 20

teachers: 0+1

clear ceiling height: 4.5 m

special requirements

- outdoor entrance of non-standard dimensions 3 m x 3 m

installations:

- faucet

- amplified electric installations

- amplified ventilation (due to dust)

materialization/other:

- adequate flooring

equipment /furniture and devices/

- wall shelves for disposal of materials (along one free wall)

1. workbench for rough woodworking, dimensions 300 cm x 150 cm

B.1.17

workshop for fine woodworking

floor area of the room: 80m²

number of rooms: 1

users (number)

students: 20

teachers:

clear ceiling height: 4.5 m

special requirements

outdoor entrance of non-standard dimensions 3 m x 3 m

installations:

- faucet

- amplified electric installations

- amplified ventilation (due to dust)

materialization/other:

- adequate flooring

equipment /furniture and devices/

- 5 woodworking workbenches

- 5 work desks, dimensions 120 cm x 100 cm

- 5 working surfaces for rough woodworking of 2 m²

-5 working surfaces for power tools 2m² - tool cabinets

- shelves for work disposal along the wall

B.1.18

plaster workshop

floor area of the room: 100 m²

number of rooms: 1

users (number)

students: 20

teachers: 0+1

clear ceiling height: 4.5 m

installations:

- faucet

- amplified ventilation (due to dust)

materialization/other:

- adequate flooring (easy to clean / non-porous)

equipment /furniture and devices/

-3 work desks, dimensions 350 cm x 100 cm

- 1 prochrome tub for mold washing 200 cm x 85 cm

- 2 tool cabinets, dimensions 200 cm x 150 cm x 60 cm

- wall shelves for work disposal (along two walls) 50 cm in depth

B.1.19

auxiliary room for plaster

floor area of the room: 30 m²

number of rooms: 1

clear ceiling height: 3.5 m

equipment /furniture and devices/

- shelves for material disposal

B.1.20

compressor room

floor area of the room: 16m²

number of rooms: 1

clear ceiling height: 3.5 m

B.1.21

ceramic furnace room

floor area of the room: 10 m²

number of rooms: 1

clear ceiling height: 3.5 m

installations:

- amplified electric installations

- amplified ventilation (due to dust)

B.1.22

depot for sculpture disposal (collection)

floor area of the room: 70m²

number of rooms: 1

clear ceiling height: 4.5 m

equipment /furniture and devices/

- shelves for sculpture storage

 

B.2.1

office

floor area of the room: 40 m²

number of rooms: 1

users (number)

teachers:

clear ceiling height: 3 m

equipment /furniture and devices/

- 1 meeting desk, dimensions 300 cm x 200 cm

- 15 chairs

- 3 computer work desks, dimensions 140 cm x 80 cm

- 12 small cabinets

- shelves for most representative work exposal - library fond cabinet - video projector with projection screen

 

 

 

B.3.1

open-air workspace

floor area of the room: 50 m²

number of rooms: 1

users (number)

students: 20

teachers:

materialization/other:

canopy

equipment /furniture and devices/

- cage for autogen bottles

 

C DEPARTMENT OF APPLIED GRAPHICS

 

C.1.1-C.1.3

printing workshop and classroom

description of activities

- room for theoretical lectures, work on templates, performing dry procedures and printing

floor area of the room: 150 m²

number of rooms: 3

necessary connection with other rooms

- at the same floor and in vicinity of etching room and teacher’s office

users (number)

students: 20

teachers:

clear ceiling height: 3.5 m

special requirements

- wide double doors for easier importation of heavy machinery

- natural lighting: good source - artificial lighting: good

installations:

- faucet

- at least 8 electrical sockets (on separate walls)        - ceiling outlet for video projector

- good ventilation system

materialization/other:

- firm floors resistant to physical damage and aggressive cleaning products (tile flooring, industrial flooring, rubber flooring, etc.)

equipment /furniture and devices/

- 20 desks dimensions, 160 cm x 80 cm (personal working space for each student - flat stable desk with reinforced waterproof working surface, coated or made of metal - providing work material and equipment disposal)

-20 chairs                             -20 lockers (boxes) for paint thinners, oils, rollers, etc. dimensions 35cm x 45cm x 150cm  (WxLxH)-at least 2 printing presses

- 2 closets for printing ink disposal, dimensions 120 cm x 40 cm x 80 cm  (WxLxH)

- 2 dryers for imprints, dimensions 120 cm x 90 cm x 200 cm  (WxLxH)

- rosin heater

- free working surface or separate desk for applying colophony              - free working surface or separate desk for drying paper

- 1 classic green board, dimensions 180 cm x 120 cm

- video projector with a computer

- wardrobe hangers

- 2 taps and built-in tubs aligned in a row, coated with ceramic tiles, dimensions 90 cm x 120 cm x 30 cm  (WxLxH)

- 1 tap for washing of boards, tools, hands and paper soaking, dimensions 90 cm x 60 cm x 30 cm  (WxLxH)

- rails and systems for hanging of student papers in a format 70 cm x 100 cm

- first aid kit

- fire-extinguisher

 

C.1.4-C.1.7

printmaking workshop and studio

floor area of the room: 120m²

number of rooms: 4

necessary connection with other rooms

- at the same floor and in vicinity of etching room and teacher’s office

users (number)

students: 10

teachers:

clear ceiling height: 3.5 m

special requirements

- wide double doors for easier importation of heavy machinery - space purchasing new presses should be left - room with sliding panels or 2 connected rooms

- natural lighting: good source       - artificial lighting: good

installations:

- faucet

- at least 8 electrical sockets (on separate walls)        - ceiling outlet for video projector

- good ventilation system

materialization/other:

- firm floors resistant to physical damage and aggressive cleaning products (tile flooring, industrial flooring, rubber flooring, etc.)

equipment /furniture and devices/

- 10 desks with drawer cabinets (personal working space for each student - flat stable desk with reinforced waterproof surface)

-10 chairs -10 lockers (boxes) for paint thinners, oils, rollers, etc. dimensions 35cm x 45cm x 150cm  (WxLxH)   -at least 2 printing presses

- 1 closets for printing ink disposal, dimensions 120 cm x 40 cm x 80 cm  (WxLxH)

- 1 dryers for imprints, dimensions 120 cm x 90 cm x 200 cm  (WxLxH)

- rosin heater

- free working surface or separate desk for applying colophony - free working surface or separate desk for drying paper

- 2 taps and built-in tubs aligned in a row, coated with ceramic tiles, dimensions 90 cm x 120 cm x 30 cm  (WxLxH)

- 1 tap for washing of boards, tools, hands and paper soaking, dimensions 90 cm x 60 cm x 30 cm  (WxLxH)

- shelves for paper disposal 125 cm x 90 cm

- wardrobe hangers

- rails and systems for hanging of student papers in a format 70 cm x 100 cm

- first aid kit

- fire-extinguisher

 

C.1.8

lithography workshop

floor area of the room: 80m²

number of rooms: 1

necessary connection with other rooms

- at the same floor and in vicinity of teachers’ offices

users (number)

students: 10

teachers:

clear ceiling height: 3.5 m

special requirements

- wide double doors for easier importation of heavy machinery  

installations:

- faucet

- at least 4 electrical sockets (on separate walls)

- good ventilation system + additional ventilation

materialization/other:

- firm floors resistant to physical damage and aggressive cleaning products

equipment /furniture and devices/

- 5 desks, dimensions 160 cm x 80 cm with drawer cabinets (personal working space for each student - flat stable desk with reinforced waterproof working surface and adjustable height)

-5 chairs - at least 2 printing presses

- 1 closets for printing ink disposal, dimensions 120 cm x 40 cm x 80 cm  (WxLxH)

- 1 dryers for imprints, dimensions 120 cm x 90 cm x 200 cm  (WxLxH)

- separate working surface, dimensions 180 cm x 120 cm

- free working surface or separate desk for drying papers - 2 taps and built-in tubs aligned in a row, coated with ceramic tiles, dimensions 90 cm x 120 cm x 30 cm  (WxLxH)

- 1 tap for washing of boards, tools, hands and paper soaking, dimensions 90 cm x 60 cm x 30 cm  (WxLxH)

- reinforced segmented shelf for disposal of lithographic stone 95 cm x 100 cm x 100 cm

- 1 classic green board, dimensions 180 cm x 120 cm

- wardrobe hangers

- rails and systems for hanging of student papers in a format 70 cm x 100 cm

- bucket of sand, 50 kg

C.1.9-C.1.11

etching

floor area of the room: 40 m²

number of rooms: 3

necessary connection with other rooms

in vicinity of classrooms, studios and workshops for print-work

- in vicinity of emergency exit

clear ceiling height: 3.5 m

installations:

- faucet

- additional powerful ventilation (work with acids) + additional aspirator above the tubs with acids

materialization/other:

- floors and walls should be protected with ceramic tiles to make cleaning easier and avoid corrosion

- part against the wall, covered with tiles, for disposal of acid barrels 400 cm x 300 cm x 100 cm  (WxLxH)

equipment /furniture and devices/

- 2 taps and built-in tubs aligned in a row, coated with ceramic tiles, dimensions 80 cm x 100 cm x 30 cm  (WxLxH) for washing of boards (with wide drainage)

- wide work surfaces with acid tubs (with enough space for adding more tubs if necessary)

- 3 acid tubs, dimensions 120 cm x 80 cm x 13 cm  (WxLxH)

- flat surface for smaller tubs used in various purposes

- 2 small tubs used in various purposes 90 cm x 70 cm x 13 cm  (WxLxH)

-first aid kit   

C.1.12

screen printing workshop

floor area of the room: 80m²

number of rooms: 1

necessary connection with other rooms

-at the same floor and in vicinity of classrooms, studios and workshops for print-work

users (number)

students: 30

teachers:

clear ceiling height: 3.5 m

special requirements

- within the workshop a smaller room without light for screen exposure (with folding doors)

installations:

- faucet

- at least 4 electrical sockets arranged around the room

- good ventilation

materialization/other:

- walls and floors protected with tiles

equipment /furniture and devices/

- a tap and built-in tub for screen washing, dimensions 100 cm x 120 cm x 30 cm (WxLxH) (with drain on the the floor under the tub)

- desk for exposing, 120 cm x 90 cm x 130 cm (WxLxH); 

- desk for developing, 120 cm x 90 cm x 130 cm (WxLxH)  

- 2 desks for printing, 120 cm x 90 cm x 130 cm (WxLxH)

- compressor and compressor gun for washing screens

- dryer for imprints 120 cm x 90 cm x 200 cm (WxLxH)

- refrigerator for storing ink

- cabinet, 120 cm x 40 cm x 200 cm (WxLxH)

- automated printing machine 120 cm x 150 cm x 140 cm (WxLxH)

- wardrobe hangers

-first aid kit 

C.1.13

auxiliary room / closet

floor area of the room: 30 m²

number of rooms: 1

necessary connection with other rooms

- on the same floor and in vicinity of cargo elevator

clear ceiling height: 3.0 - 3.5 m

materialization/other:

- reinforced floor resistant to physical damage

- dry room

equipment /furniture and devices/

- 2 rails on the wall holding linoleum rolls (easy to unwind and cut) 200 cm x 40 cm x 40 cm (WxLxH) 

- 3 wooden boxes for storing spelter, copper and aluminum plates 220 cm x 120 cm

- 2 wooden boxes for glass and frames 120 cm x 80 cm

- sectioned shelf for disposal of paint and paint thinners, floor to ceiling, 50cm in depth

 

C.2.1-C.2.3

office

for course teachers

floor area of the room: 30 m²

number of rooms: 3

necessary connection with other rooms

- on the same floor

users (number)

teachers: 1+0

clear ceiling height: 3.0-3.5 m

installations:

- faucet

- minimum 2 electrical sockets

equipment /furniture and devices/

- 1 working desk, dimensions 160 cm x 80 cm

- 1 work chair

- 2 chairs  

- 1 segmented shelf for disposal of imprints 90 cm x 120 cm x 80 cm  (WxLxH)

-bookshelf

- computer

- 8 drawer cabinets for archiving student papers, 120 cm x 90 cm x 50 cm  (WxLxH)

- additional drawer cabinet, dimensions 45 cm x 50 cm x 60 cm  (WxLxH)

- rails and systems for hanging of student papers in a format 70 cm x 100 cm

- wardrobe hanger

-first aid kit

C.2.4

office

for assistants

floor area of the room: 40 m²

number of rooms: 1

necessary connection with other rooms

- on the same floor

users (number)

teachers: 3

clear ceiling height: 3.0-3.5 m

installations:

- minimum 2 electrical sockets

equipment /furniture and devices/

- 3 work desks with locking drawers

- 3 work chairs

-3 chairs

- 1 cabinet for disposal of material and tools od approximate dimensions 140 cm x 100 cm x200 cm  (WxLxH)

- 3 additional drawer cabinets, dimensions 45 cm x 50 cm x 60 cm  (WxLxH)

- rails and systems for hanging of student papers in a format 70 cm x 100 cm

- wardrobe hanger

-first aid kit    

-fire extinguisher  

 

D SHARED PREMISES

EXHIBITION AREAS

 

D.1.1

history department

room for old printing presses owned by the faculty (showpieces that are still in function)

floor area of the room:  

number of rooms: 1

clear ceiling height: 4.5 m

special requirements

- wide double doors for easier importation of heavy machinery

-good lighting

installations:

- at least 4 electrical sockets

equipment /furniture and devices/

 - rails or other systems for hanging info panels about showpieces and history

- frames for photographs of current and predecessor professors

- bookshelf with lock

- glass showcase for smaller showpieces with lock

- separate drawer cabinet with lock

D.1.2

exhibition space

*for exhibiting students’ art works may be used wide hallways, atrium etc.

floor area of the room: in accordance with the spatial concept of the competition solution, the participants propose the position and the concept of the exhibition space, preferably available from the outside. Connection of rooms - studios for exhibition needs should be enabled

number of rooms: 1

clear ceiling height: 4.5 m

special requirements

- additional lighting

equipment /furniture and devices/

- rails and systems for hanging of student papers

 

D.1.3

Multipurpose hall - lecture hall

*approximate number od 100 - 150 listeners

floor area of the room: in accordance with the spatial concept of the competition solution, the participants propose the position and the concept of the lecture hall, preferably in vicinity of exhibition area and available from the outside.

number of rooms: 1

clear ceiling height: approximately 4.5 m

special requirements

Preferably natural lighting and ventilation

equipment /furniture and devices/

- video projection equipment

IT

 

D.2.1

server room

 

auxiliary rooms

 

D.3.1

copy room

 

D.3.2

Café in accordance with the spatial concept of the competition solution, the participants propose the position and the concept of the café for needs of students but also for communication outside

D.3.3

Sanitary facilities***

sanitary facilities should be planned for students and teachers in accordance with the spatial concept and necessary capacities

D.3.4

wardrobe

- wardrobe with showers and teachers should be planned within sculpture workshops

D.3.5

archives

in accordance with spatial abilities

D.3.6

closets

in accordance with spatial abilities

Sanitary areas in the facility include areas for students, teachers, possibly visitors and special ones, showers within the wardrobe of the sculpture studio. Group sanitary areas -there should be an equal number of male and female toilets. The total capacity of the toilets should be proportionally distributed on the floors, following the concept. Suggest a wardrobe concept for students.

E TECHNICAL FACILITIES

E.1.1

Hygienic maintenance of the facility service

rooms for support staff should be planned

E.2.1

Waste collection

in area available to communal vehicles

E.3.1

Repositories

E.4.1

Maintenance workshops

E.5.1

heating substation

1

E.5.2

substation – air conditioning and ventilation

1

E.5.3

electric system boiler

1

These premises include the technical areas of the installation systems for heating, air conditioning, energy units, security, technical communications, economical accesses, equipment storage and evacuation routes. The air conditioning system should be able to selectively turn on/off air conditioning for certain parts of the building.

If the investment allows, the heating and cooling of the internal spaces of the complex should use geothermal energy; in addition to large financial savings in the operation of the facility the area of the technical spaces for heating and air conditioning will be significantly reduced.

It should be borne in mind that most of the contents of the facility will be equipped with video surveillance.

It is recommended that most of the required technical rooms be located on the underground floors.

F COMMUNICATIONS

F.1.1

Windshield, entrance area in accordance with the spatial concept

 

F.2.1

Hallways

 in accordance with the spatial concept, preferably with natural lighting and ventilation

F.3.1

Staircases

 in accordance with the spatial concept, preferably with natural lighting and ventilation

F.4.1

Elevators

in accordance with the spatial concept

F.4.2

Cargo elevator

connected with premises for delivery

 

The surface of the accompanying areas with communications should be optimized depending on the mutual position of studios and other auxiliary rooms. Possibility of multipurpose use of communication zones should be provided.

The addition to the net surface includes the surfaces of vertical (stairs, lifts) and horizontal communications, installations and walls, which implies a programme gross surface.

G GARAGE

G.1.1

garage

 

G.2.1

auxiliary rooms

 

possibility to deliver heavier material using cargo vehicles

 

42 FPU program

Picture 42 - the Faculty of Applied Arts’ Photo Archives